• VMware

    Learn about VMware virtualization for its products like vsphere ESX and ESXi, vCenter Server, VMware View, VMware P2V and many more

  • Linux

    Step by step configuration tutorials for many of the Linux services like DNS, DHCP, FTP, Samba4 etc including many tips and tricks in Red Hat Linux.

  • Database

    Learn installation and configuration of databases like Oracle, My SQL, Postgresql, etc including many other related tutorials in Linux.

  • Connecting two IP PBX box using SIP Trunk

    Suppose you have two IP PBX box one at INDIA and other at US and you want to integrate all the SIP
    extensions created on both the server with each other so that they can make calls to each other.

    IP PBX 1 (India)
    SIP Extension : 1000, 1001

    IP PBX 2 (United States)
    SIP Extension : 2000, 2001

    We will have to create an internal SIP Trunk connecting both the PBX box. Follow the below mentioned steps to do the same

    Configuring IP PBX for server

    Click on Connectivity and select Add SIP Trunk

    Name you Trunk for my case SIP_Trunk_to_US

    Configure your Outgoing and incoming settings as shown below. Create a user for incoming calls and one for outgoing which will be used on the US server for authentication purpose.

    Configuring IP PBX on (US)

    Open the SIP Trunk as shown above with the following configuration. Use any Trunk Name as in my case SIP_Trunk_to_IN

    Configure the Outgoing and incoming settings as shown below. Be sure you use the same user for incoming which you used for outgoing in INDIA SIP Trunk.

    Save and apply the configuration. Now we need to configure outbound routes on both the servers

    IP PBX (India)

    Click on Connectivity and select Outbound Route

    Configure the route as shown below

    The dial plan I have used is X. which means that any extension from IN can call to any extension in US.

    IP PBX 2 US

    Configure Outbound trunk with the following settings

    Click on Submit and Apply the configuration on both the servers
    On the home page of your PBX web console you should be able to see IP Trunk Online

    Now you should be able to make calls from 1000 to 2000 i.e from India PBX to US PBX.

    Let me know your success and failure.

    Related Articles

    Connecting two IP PBX box using SIP Trunk Connecting two IP PBX box using SIP Trunk Reviewed by admin on Wednesday, March 06, 2013 Rating: 5


    1. It's a good way to do it, but there are more ways to connect your מרכזיות IP

    2. Business Phone Service is ideal for small business and entrepreneurs. It gives a professional image and make sure that you don't miss a single call. Few months back, I decided to buy Hosted pbx from Telcan. You can get more information here: Business Phone Service

    3. it work thank you so much :) good job man.

    4. This diagrammatic representation has made it so clear in how to connect two IP PBX box using SIP Trunk. Thanks for sharing
      Regards- http://www.speechpath.ie/index.php/sip-trunks/

    5. where are the others ways to connect this?

    6. Hi man
      I setup as your way, but It cannot work.
      When I make the call it say "all circuit are busy now, please try again later"
      Could you help me. Thank you very much.

    7. call failed: Service unavailable

    8. Call Failed; Service unavailable


    Powered by Blogger.